DIMENSIONS
48″ long x 18″ high x 13″ wide.
PREPARATION
SHOPPING LIST
- 1 – 2×6 @ 8 feet or stud length
- 2 – 2×4 @ 8 feet long
- 1 – 2×2 @ 8 feet long
- 1 – 2×12 @ 4 feet long (OR use a 2×6 for the seat – grab an extra
- 2×6 @ 8 feet long
COMMON MATERIALS
- Elmer’s Wood Glue
- Elmer’s Wood Filler
- 120 grit sandpaper
- primer
- wood conditioner
- paint
- paint brush
CUT LIST
- 4 – 2×6 @ 18″
- 2 – 2×2 @ 11 1/2″
- 2 – 2×4 @ 47 1/2″
- 2 – 2×4 @ 3 1/2″
- 1 – 2×12 @ 47 1/2″
INSTRUCTIONS
STEP 1
Start with 2 of the legs. Measure down and in from the outside corners 1 1/2″. Screw the 2×2 in place, as shown above.
STEP 2
Add the side apron pieces, the long 2x4s as shown above. Keep the top edge of the 2×4 flush with the top of the legs. Predrill and countersink into the 2×2. Also, screw from the outside of the leg pieces into the end edge of the side apron.
STEP 3
Add the end apron pieces, predrilling and securing to the 2×2. Keep the top edge flush with the leg pieces.
STEP 4
Add the seat, the 2×12, as shown above. Predrill and screw through the sides of the apron into the outer edges of the seat.
CREDIT ANA WHITE