DIMENSIONS

Dimensions are shown above.

PREPARATION

SHOPPING LIST
  • 4 – Portsmouth Large Dining Table Legs from Osbourne Wood
  • 4 – 1×10 boards @ 8 feet long (save scraps to use for benches!)
  • 2 – 1×4 @ 8 feet long
  • 1 – 1×3 @ 8 feet long
COMMON MATERIALS
  • 1-1/4″ Pocket Hole Screws
  • Elmer’s Wood Glue
  • Elmer’s Wood Filler
  • 120 grit sandpaper
CUT LIST
  • 2 – 1×4 @ 24 1/2″
  • 2 – 1×4 @ 66″
  • 2 – 1×3 @ 30 1/2″
  • 4 – 1×10 @ 78″ Angle supports cut from scraps

INSTRUCTIONS

STEP 1

Build your tabletop first. Set aside on a flat level surface to let dry.

STEP 2

Next, build your end aprons/leg pieces.

STEP 3

And then simply connect with side aprons.

STEP 4

Add center supports.

STEP 5

 

FINISHING INSTRUCTIONS

Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with a damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

CREDIT  ANA WHITE

Share This Story, Choose Your Platform!