DIMENSIONS
Dimensions shown above.
PREPARATION
SHOPPING LIST
- 2 – 1×8 @ 8 feet long
- 30 – 2″ self tapping wood screws (try spax or similar)
- Wood glue
CUT LIST
- 1 – 1×8 @ 26-1/4″
- 1 – 1×8 @ 7″
- 1 – 1×8 @ 11-3/8″ one end cut at 15 degrees off square, longest point measurement
- 2 – 1×8 @ 14″ one end cut at 15 degrees off square, longest point measurement
- 1 – 1×8 @ 34-1/4″
- 1 – 1×8 @ 21-3/4″ – both ends cut at 15 degrees off square, long point to short point measurement
- 1 – 1×8 @ 8-1/2″ – both ends cut at 15 degrees off square, long point to short point measurement
- 1 – 1×4 @ 7-1/4″
- 1 – 1×4 @ 5-3/4″
INSTRUCTIONS
STEP 1
Cut all the pieces out with a compound miter saw from the 1x8s.
Cut the doorway out of the wall piece using the jigsaw. Sand any rough edges.
Attach to the floor using the 2″ screws.
STEP 2
Cut a matching doorway out of the second wall piece. Sand any rough edges.
Attach to the floor from underneath using glue and the screws.
STEP 3
Cut windows out of wall pieces by first drilling a hole in the middle of the window with a drill bit larger than your jigsaw blade. Insert jigsaw into the hole and cut the window out. Sand any rough edges.
Attach walls to the floor with wood screws and glue.
STEP 4
Attach floor to all the walls with the screws and wood glue.
STEP 5
STEP 6
Attach 1×4 railing to the end of the dollhouse with wood screws and glue.
CREDIT ANA WHITE