Build your own rustic wooden candle holders! These are so easy to make with just some scrap 4x4s and flat molding.
DIMENSIONS
Can be made any height that is stable
PREPARATIONS
SHOPPING LIST
- 1 – 4×4 @ desired height (Jaime’s are 3.5”, 4.5” and 5”)
- 16″ – 1/4” x 7/8” flat lattice
- 18″ – 1/2” x 3/4” flat moulding
- 1″ brad nails or pin nails
CUT LIST
- 1 – 4×4 @ desired height (mine are 3.5”, 4.5” and 5”)
- 4 – 1/4” x 7/8” flat lattice @ 4” long point to long point, both ends 45 degree miter not parallel
- 4 – 1/2” x 3/4” flat moulding @ 4 3/8” long point to long point, both ends 45 degree miter not parallel
INSTRUCTIONS
STEP 1
Cut 4×4 with compound miter saw to desired length.
Miter the bottom trim around the base, attach with glue and 1″ brad nails or pin nails.
STEP 2
Repeat steps for the smaller top trim, but leave a 1/4″ reveal at the top.
CREDIT ANA WHITE